Cooling towers | Elfi Filtration https://www.elfifiltration.com/en/applicazione/cooling-towers/ Filtri autopulenti industriali Tue, 29 Oct 2024 14:37:48 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 Manual Filter RL Y https://www.elfifiltration.com/en/products/industrial-filtration/manual-filter-rl-y/ Tue, 10 Sep 2024 10:26:04 +0000 https://www.elfifiltration.com/prodotti/uncategorized/manual-filter-rl-y/ MANUAL FILTER AISI 316
MAIN TECHNICAL FEATURES:
  • Filtration degree from 300 to 25 μm on polyester mesh
  • Max flow rate 275 m3/h with a single filter
APPLICATIONS:
  • Pre-filtration in UF systems
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers
  • Irrigation
  • Seawater
DM174/2004 Certificate for Contact with Potable Water

Download Datasheet

L'articolo Manual Filter RL Y proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the (IN) inlet and goes through the filtering cylinder from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

To clean the filter element is necessary drain the vessel through the ball valve, open the cover, extract the filter element and wash it.

DIMENSIONS AND TECHNICAL DATA

RL Y 2-10RL Y 80-15RL Y 100-30RL Y 150-45RL Y 200-60
Filtering area – (cm²) 1000 1500 3000 4500 6000
Connections In/Out (1-2) 2″ M DN80 DN100 DN150 DN200
Connection Discharge (3) 1″ F 1″ F 1″ F 1″ F 1″ 1/2F
Max pressure work – Bar 10 10 10 10 10
Max temperature work – °C 50 50 50 50 50
PH – min.max 3-9 3-9 3-9 3-9 3-9
A – mm 465 635 670 915 1050
B – mm 425 500 600 750 950
C – mm 400 540 590 795 900
D – mm 230 230 335 335 335
E – mm Cartridge extraction 300 500 550 780 880
Empty weight Kg 22 25 45 66 88
Work weight Kg 28 39 76 111 169

RL Y FILTER FLOW-RATE TABLE (m³/h)

MODEL 300 µm PES 200 µm PES 125 µm PES 80 µm PES 50 µm PES 25 µm PES
RL Y 2-10 30 30 30 30 26 13
RL Y 80-15 80 80 50 50 39 19
RL Y 100-30 147 147 147 111 78 34
RL Y 150-45 216 216 216 166 117 59
RL Y 200-60 373 373 315 222 156 78

L'articolo Manual Filter RL Y proviene da Elfi Filtration.

]]> Suction Scanner self-cleaning filter MSCR PP https://www.elfifiltration.com/en/products/industrial-filtration/suction-scanner-self-cleaning-filter-mscr-pp/ Tue, 10 Sep 2024 10:04:45 +0000 https://www.elfifiltration.com/prodotti/uncategorized/suction-scanner-self-cleaning-filter-mscr-pp/ SUCTION SCANNER SELF CLEANING FILTER POLYPROPYLENE (SMALL FLOW RATE)
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration from 300 to 25 micron
  • Max flow rate 15 m3/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Prefiltration for water treatment plants
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers
  • Seawater

Download Datasheet

L'articolo Suction Scanner self-cleaning filter MSCR PP proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the IN inlet and goes through the filtering cylinder from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

The continuous settling of suspended solids inside the filtering cylinder (1) obstructs the passage of water which results in a pressure difference (∆P). At a preset value of ∆P (range 0.3 ÷ 1 Bar) an automatic cycle will start to clean the filter cylinder, this operation begins with a signal that opens the discharge valve (2) and creates communication between the suction nozzles (3) with the outside environment. At the same time, the electric motor (4) creates a rotating motion which enables the nozzles to inspect the filtering surface. Dirt is ejected through the discharge valve (2). The cleaning cycle lasts approximately 15 seconds.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control center. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

FILTER ELEMENT SECTION AND CLEANING SYSTEM

Suction Scanner self-cleaning filter MSCR PP
Technical Specifications

MODELMSCR PP -1”1/2 – 7MSCR PP -1”1/2 – 15
Filtration area (cm²)7001450
Flow rate max – m³/h1515
Connection In/Out1”1/2F1”1/2F
Discharge1” F1” F
1 Bar washing flow rate with mesh 125 micron – m³/h25
Wash duration – Sec.1515
Pressure min-max – Bar0,5-60,5-6
Temperature max – °C4040
Power supply – Volt230 50/60Hz230 50/60Hz
Power required – Watt9090
Construction certificatesCECE
Maximum size of inlet particles* – (filtration from 300 to 25 μm) – mm33
Max total suspended solids at inlet – (filtration from 300 to 80 μm) – mg/l100100
Max total suspended solids at inlet (filtration from 50 to 25 μm) – mg/l5050
A (mm)610855
B (mm)320320
C (mm)390390
D Cartridge extraction*250500
WEIGHT Kg712

FILTERING MESH FLOW RATE TABLE FOR MSCR FILTERS (m³/h)

MODEL 300 µm PES 200 µm PES 125 µm PES 80 µm PES 50 µm PES 25 µm PES
MSCR PP 1”1/2 – 7 15 15 15 13 11 8
MSCR PP 1”1/2 – 15 15 15 15 15 15 15

L'articolo Suction Scanner self-cleaning filter MSCR PP proviene da Elfi Filtration.

]]> Suction Scanner self-cleaning filter MSCR – PP MICRON https://www.elfifiltration.com/en/products/industrial-filtration/suction-scanner-self-cleaning-filter-mscr-pp-micron/ Mon, 02 Sep 2024 14:32:11 +0000 https://www.elfifiltration.com/prodotti/uncategorized/suction-scanner-self-cleaning-filter-mscr-pp-micron/ SUCTION SCANNER SELF CLEANING FILTER POLYPROPYLENE (SMALL FLOW RATE)
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration from 20 to 1 micron SINTERED FIBER 3D
  • Max flow rate 15 m3/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Prefiltration for water treatment plants
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers
  • Seawater

Download Datasheet

L'articolo Suction Scanner self-cleaning filter MSCR – PP MICRON proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the IN inlet and goes through the filtering cylinder from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

The continuous settling of suspended solids inside the filtering cylinder (1) obstructs the passage of water which results in a pressure difference (∆P). At a preset value of ∆P (range 0.3 ÷ 1 Bar) an automatic cycle will start to clean the filter cylinder (1), this operation begins with a signal that opens the discharge valve (2) and creates communication between the suction nozzles (3) with the outside environment. At the same time, the electric motor (4) creates a rotating motion which enables the nozzles to inspect the filtering surface. Dirt is ejected through the discharge valve (2). The cleaning cycle lasts approximately 15 seconds. The cleaning cycle lasts approximately 15 seconds.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control center. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

3D FILTERING TECHNOLOGY

The filtering element of the filtering fabric is made of AISI316 sintered fibre. This ensures high permeability with excellent filtering efficiency owed to the fabric’s thickness (hence called 3D) and the diameter of the fibres. At equal surface and pressure differential, this type of construction allows retention of a much greater amount of TSS (Total Suspended Solids) compared with traditional single thread fabrics. Additionally, exposed to Delta P, the fibres are far more stable compared with single thread fabrics. The filtering fabrics used are tested in our laboratories to assess the performance of the main filtering process.

Based on performance assessments, the most suitable fabrics for the requested use are selected.

SELF CLEANING FILTER MSCR – PP MICRON
Technical Specifications

MSCR PP -1″1/2 – 7MSCR PP -1″1/2 – 15
Filtration area (cm²)7001450
Flow rate max – m³/h (ΔP 0,2 Bar)1015
Connection In/Out1″1/2F1″1/2F
Discharge1″ F1″ F
1 Bar washing flow rate with mesh 125 micron – m³/h 25
Wash duration – Sec.1515
Pressure min-max – Bar1-61-6
Temperature max – °C4040
Power supply – Volt230 50/60Hz230 50/60Hz
Power required – Watt90180
Construction certificatesCECE
Maximum size of inlet particles* (filtration from 20 to 1 μm) – mm0.20.2
Max total suspended solids at inlet (filtration from 20 to 10 μm) – mg/l2020
Max total suspended solids at inlet (filtration from 20 to 10 μm) – mg/l1010
A (mm)610855
B (mm)320320
C (mm)190190
D* Cartridge extraction (mm)250500
WEIGHT Kg712

FILTERING MESH FLOW RATE TABLE FOR MSCR FILTERS (m³/h)

MODEL 20 µm AISI316 15 µm AISI316 10 µm AISI316 5 µm AISI316 1 µm AISI316
MSCR PP MICRON 1″1/2 – 7 10 9 7 5 2.5
MSCR PP MICRON 1″1/2 – 15 15 15 15 14 7.0

L'articolo Suction Scanner self-cleaning filter MSCR – PP MICRON proviene da Elfi Filtration.

]]> Suction scanner self-cleaning filter SCRO & SCRL https://www.elfifiltration.com/en/products/industrial-filtration/suction-scanner-self-cleaning-filter-scro-scrl/ Mon, 02 Sep 2024 14:07:57 +0000 https://www.elfifiltration.com/prodotti/uncategorized/suction-scanner-self-cleaning-filter-scro-scrl/ SUCTION SCANNER SELF CLEANING FILTER ASI316 (MEDIUM, BIG FLOW RATE)
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration degree from 2000 to 25 μm on polyester mesh/ AISI316
  • Maximum flow rate 1000 m3/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Pre-filtration in UF systems
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers
  • Seawater
  • Irrigation

Download Datasheet

L'articolo Suction scanner self-cleaning filter SCRO & SCRL proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the IN inlet and goes through the filtering cylinder (4) from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

The continuous settling of suspended solids inside the filtering cylinder (4) obstructs the passage of water which results in a pressure difference (∆P). At a preset value of ∆P (range 0.3 ÷ 1 Bar) an automatic cycle will start to clean the filter cylinder (4). This operation begins with a signal that opens the discharge valve (3) and creates communication between the suction nozzles (1) with the outside environment. At the same time, the electric motor (5) creates a rotating motion which enables the nozzles to inspect the filtering surface. Dirt is ejected through the discharge valve (3). The cleaning cycle lasts approximately 15 seconds.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch or by time. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control centre. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

FILTER ELEMENT SECTION AND CLEANING SYSTEM

DIMENSIONI E DATI TECNICI | SCRL

SCR L 10 SCR L 15 SCR L 30 SCR L 45 SCR L 60 SCR L 75 SCR L 90 SCR L 130
Area filtrante (cm²) 1000 1500 3000 4500 6000 7500 9000 13000
Attacchi In/Out 2" 3" DN100 DN150 DN200 DN250 DN300 DN350
Attacchi Scarico 1" F 1" F 1"1/2 F 1"1/2 F 1"1/2 F 1"1/2 F 1"1/2 F 2" F
Attacchi svuotamento 1/2" F 1/2" F 1/2" F 1/2" F 1/2" F 1/2" F 1/2" F 1" F
Extra portata richiesta in lavaggio a 1 Bar con rete da 125 micron – m³/h 4 4 7 9 9 12 12 15
Durata del lavaggio – Sec. 15 15 15 15 15 15 15 15
Pressione min-max – Bar 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10
Temperatura max - °C 40 40 40 40 40 40 40 40
Alimentazione elettrica – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Potenza richiesta – Watt 90 90 180 180 180 370 370 550
Elettrovalvola – Volt /Watt 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6
Alimentazione pneumatica - Bar 2 - 8 2 - 8 2 - 8 2 - 8 2 - 8 2 - 8 2 - 8 2 - 8
Certificati di costruzione CE CE CE CE CE CE CE CE
Massima dimensione di particelle in ingresso *– mm 3 3 3 3 3 3 3 3
Massimo totale solidi sospesi in ingresso 125 micron– mg/l 100 100 100 100 100 100 100 100
A (mm) 757 903 1071 1309 1755 2027 2581 3181
B (mm) 470 485 607 635 706 791 969 929
C (mm) 327 327 423 423 516 714 852 852
D (mm) Estrazione cartuccia 450 534 600 885 1130 1160 1160 1690
PESO a vuoto Kg 28 34 51 64 75 90 116 285
PESO in lavoro Kg 36 46 68 106 133 206 346 598

DIMENSIONI E DATI TECNICI | SCRO

SCRO 10 SCRO 15 SCRO 30 SCRO 45 SCRO 60 SCRO 75 SCRO 90 SCRO 130
Area filtrante (cm²) 1000 1500 3000 4500 6000 7500 9000 13000
Attacchi In/Out 2"-3" 2"-3" 3" DN100 DN150 DN100 DN150 DN200 DN150 DN200 DN250 DN150 DN250 DN200 DN250 DN350
Attacchi Scarico 1" 1/2F 1" 1/2F 2" F 2" F 2" F 2" F 2" F 2" F
Attacchi svuotamento 1/4" F 1/4" F 1/4" F 1/4" F 1/4" F 1/4" F 1" F 1" F
Extra portata richiesta in lavaggio a 1 Bar con rete da 300 a 25 micron – m³/h 2 3 7 9 11 11 13 15
Durata del lavaggio – Sec. 15 15 15 15 15 15 15 15
Pressione min-max –Bar 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10
Temperatura max - °C 40 40 40 40 40 40 40 40
Alimentazione elettrica – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Potenza richiesta –Watt 90 90 180 180 180 370 370 550
Elettrovalvola – Volt /Watt 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6
Alimentazione pneumatica - Bar 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8
Certificati di costruzione CE CE CE CE CE CE CE CE
Massima dimensione di particelle in ingresso *– mm 3 3 3 3 3 3 3 3
Massimo totale solidi sospesi in ingresso 125 micron– mg/l 100 100 100 100 100 100 100 100
A (mm) 900 1045 1430 1675 1920 2100 2205 2576
B (mm) 415 415 540 540 630 791 904 1114
C (mm) 330 330 410 430 460 634 678 870
D (mm) *Estrazione cartuccia 450 537 840 885 1130 1160 1160 1690
PESO a vuoto Kg 37 55 81 125 200 225 230 285
PESO in lavoro Kg 38 56 116 222 370 470 570 633

FILTERING MESH FLOW RATE TABLE FOR SCR FILTERS (m³/h)

MODEL 500 µm PES AISI316 300 µm PES AISI316 200 µm PES AISI316 120 µm PES AISI316 80 µm PES AISI316 50 µm PES AISI316 25 µm PES AISI316
SCR 2-10 30 30 30 30 30 26 13
SCR 3-15 50 50 50 50 50 39 19
SCR 100-30 147 147 147 147 111 78 34
SCR 150-45 216 216 216 216 166 117 59
SCR 200-60 373 373 373 315 222 156 78
SCR 250-75 573 573 573 395 277 195 98
SCR 300-90 720 720 720 473 333 234 117
SCR 350-130 1038 1038 1038 682 373 338 169

The flow rates indicated refer to a load loss of 0.2 Bar with clean, filtered water.

Case Studies

FILTRO SCR L - SCR O

Reservoir Water Tertiary Treatment

Heat Exchanger – Well Water – Milan

Heat Exchanger – Well Water

L'articolo Suction scanner self-cleaning filter SCRO & SCRL proviene da Elfi Filtration.

]]> Suction Scanner self cleaning filter SCRL HP https://www.elfifiltration.com/en/products/industrial-filtration/suction-scanner-self-cleaning-filter-scrl-hp/ Mon, 02 Sep 2024 13:45:28 +0000 https://www.elfifiltration.com/prodotti/uncategorized/suction-scanner-self-cleaning-filter-scrl-hp/ SUCTION SCANNER SELF CLEANING FILTER ASI316 HIGH PRESSURE (MEDIUM, BIG FLOW RATE) - MAX PRESSURE: 16 BAR
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration degree from 2000 to 25 μm on polyester mesh/ AISI316
  • Maximum flow rate 1000 m3/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Pre-filtration in UF systems
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers
  • Seawater
  • Irrigation

Download Datasheet

L'articolo Suction Scanner self cleaning filter SCRL HP proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the IN inlet and goes through the filtering cylinder (4) from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

The continuous settling of suspended solids inside the filtering cylinder (4) obstructs the passage of water which results in a pressure difference (∆P). At a preset value of ∆P (range 0.3 ÷ 1 Bar) an automatic cycle will start to clean the filter cylinder (4). This operation begins with a signal that opens the discharge valve (3) and creates communication between the suction nozzles (1) with the outside environment. At the same time, the electric motor (5) creates a rotating motion which enables the nozzles to inspect the filtering surface. Dirt is ejected through the discharge valve (3). The cleaning cycle lasts approximately 15 seconds.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control center. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

FILTER ELEMENT SECTION AND CLEANING SYSTEM

SUCTION SCANNER SELF CLEANING FILTER SCRL HP
Technical Specifications

MODEL SCR L 10 SCR L 15 SCR L 30 SCR L 45 SCR L 60 SCR L 75 SCR L 90 SCR L 130
Filtering area (cm²) 1000 1500 3000 4500 6000 7500 9000 13000
Connections- In/Out 2″ 3″ DN100 DN150 DN200 DN250 DN300 DN350
Exhaust connections 1″ F 1″ F 1″ F 1″ F 1″ F 1″ F 1″ F 1″ F
Draining connections 1/2″ F 1/2″ F 1/2″ F 1/2″ F 1/2″ F 1″ F 1″ F 1″ F
1 Bar washing flow rate with mesh from 500 to 25 micron – m³/h 2 3 4 7 9 9 11 15
Wash duration – Sec 15 15 15 15 15 15 15 15
Min-max pressure – Bar 0,5-16 0,5-16 0,5-16 0,5-16 0,5-16 0,5-16 0,5-16 0,5-16
Max Temperature – °C 40 40 40 40 40 40 40 40
Power supply – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Power required – Watt 90 180 180 180 370 370 370 550
Solenoid valve – Volt /Watt 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6
Pneumatic supply – Bar 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8
Construction certificates CE CE CE CE CE CE CE CE
Maximum size of inlet particles* – mm 3 3 3 3 3 3 3 3
Max total suspended solids at inlet 125 micron– mg/l 100 100 100 100 100 100 100 100
A (mm) 757 903 1071 1309 1755 2027 2581 3181
B (mm) 510 945 945 675 735 820 905 1005
C (mm) 327 327 423 423 516 714 852 852
D (mm) Cartridge extraction 450 640 885 1130 1160 1310 1160 1690
WEIGHT when empty Kg 34 61 72 85 125 218 256 295
WEIGHT in operation Kg 46 83 115 126 218 352 416 608

FILTERING MESH FLOW RATE TABLE FOR SCR L FILTERS (m³/h)

MODEL 500 µm PES AISI316 300 µm PES AISI316 200 µm PES AISI316 120 µm PES AISI316 80 µm PES AISI316 50 µm PES AISI316 25 µm PES AISI316
SCR 2-10 30 30 30 30 30 26 13
SCR 3-15 50 50 50 50 50 39 19
SCR 100-30 147 147 147 147 111 78 34
SCR 150-45 216 216 216 216 166 117 59
SCR 200-60 373 373 373 315 222 156 78
SCR 250-75 573 573 573 395 277 195 98
SCR 300-90 720 720 720 473 333 234 117
SCR 350-130 1038 1038 1038 682 373 338 169

SUGGESTED INTALLATION

L'articolo Suction Scanner self cleaning filter SCRL HP proviene da Elfi Filtration.

]]> Suction Scanner self cleaning filter SCRL HT https://www.elfifiltration.com/en/products/industrial-filtration/suction-scanner-self-cleaning-filter-scrl-ht/ Mon, 02 Sep 2024 12:56:21 +0000 https://www.elfifiltration.com/prodotti/uncategorized/suction-scanner-self-cleaning-filter-scrl-ht/ SUCTION SCANNER SELF CLEANING FILTER ASI316 HIGH TEMPERATURE (MEDIUM, BIG FLOW RATE) - Max Temperature 80°
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration degree from 2000 to 25 μm on polyester mesh/ AISI316
  • Maximum flow rate 1000 m3/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Pre-filtration in UF systems
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers
  • Seawater
  • Irrigation

Download Datasheet

L'articolo Suction Scanner self cleaning filter SCRL HT proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the IN inlet and goes through the filtering cylinder (4) from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

The continuous settling of suspended solids inside the filtering cylinder (4) obstructs the passage of water which results in a pressure difference (∆P). At a preset value of ∆P (range 0.3 ÷ 1 Bar) an automatic cycle will start to clean the filter cylinder (4). This operation begins with a signal that opens the discharge valve (3) and creates communication between the suction nozzles (1) with the outside environment. At the same time, the electric motor (5) creates a rotating motion which enables the nozzles to inspect the filtering surface. Dirt is ejected through the discharge valve (3). The cleaning cycle lasts approximately 15 seconds.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control center. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

FILTER ELEMENT SECTION AND CLEANING SYSTEM

SUCTION SCANNER SELF CLEANING FILTER SCRL HT
Technical Specifications

MODEL SCR L 10 SCR L 15 SCR L 30 SCR L 45 SCR L 60 SCR L 75 SCR L 90 SCR L 130
Filtering area (cm²) 1000 1500 3000 4500 6000 7500 9000 13000
Connections- In/Out 2″ 3″ DN100 DN150 DN200 DN250 DN300 DN350
Exhaust connections 1″ F 1″ F 1 1/2″ F 1 1/2″ F 1 1/2″ F 1 1/2″ F 1 1/2″ F 2″ F
Draining connections 1/2″ F 1/2″ F 1/2″ F 1/2″ F 1/2″ F 1 1/2″ F 1 1/2″ F 1″ F
1 Bar washing flow rate with mesh from 500 to 25 micron – m³/h 2 3 4 7 9 9 11 15
Wash duration – Sec 15 15 15 15 15 15 15 15
Min-max pressure – Bar 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10 0,5-10
Max Temperature – °C 85 85 85 85 85 85 85 85
Power supply – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Power required – Watt 90 180 180 180 370 370 370 550
Solenoid valve – Volt /Watt 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6 24 AC /6
Pneumatic supply – Bar 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8 2 – 8
Construction certificates CE CE CE CE CE CE CE CE
Maximum size of inlet particles* – mm 3 3 3 3 3 3 3 3
Max total suspended solids at inlet 125 micron– mg/l 100 100 100 100 100 100 100 100
A (mm) 757 903 1071 1309 1755 2027 2581 3181
B (mm) 470 485 607 635 735 820 905 1005
C (mm) 327 423 423 516 714 820 852 852
D (mm) Cartridge extraction 450 640 640 885 1130 1160 1160 1690
WEIGHT when empty Kg 34 51 62 75 85 125 208 295
WEIGHT in operation Kg 46 61 72 85 125 218 356 598

FILTERING MESH FLOW RATE TABLE FOR SCR L FILTERS (m³/h)

MODEL 500 µm PES AISI316 300 µm PES AISI316 200 µm PES AISI316 120 µm PES AISI316 80 µm PES AISI316 50 µm PES AISI316 25 µm PES AISI316
SCR 2-10 50 50 50 50 37 26 13
SCR 3-15 80 80 80 80 55 40 19
SCR 100-30 140 140 140 140 95 70 34
SCR 150-45 205 205 205 205 145 103 51
SCR 200-60 275 275 275 275 193 138 69
SCR 250-75 360 360 360 360 250 180 90
SCR 300-90 685 685 630 480 319 228 114
SCR 350-130 1030 1030 1030 685 480 340 171

The flow rates indicated refer to a load loss of 0.2 Bar with clean, filtered water.

SUGGESTED INTALLATION

L'articolo Suction Scanner self cleaning filter SCRL HT proviene da Elfi Filtration.

]]> Suction Scanner self cleaning filter SCR LM & OM https://www.elfifiltration.com/en/products/industrial-filtration/suction-scanner-self-cleaning-filter-scr-lm-om/ Mon, 02 Sep 2024 12:31:58 +0000 https://www.elfifiltration.com/prodotti/uncategorized/suction-scanner-self-cleaning-filter-scr-lm-om/ SUCTION SCANNER SELF CLEANING FILTER ASI316 (MEDIUM FLOW RATE)
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration degree from 20 to 5 micron
  • Maximum flow rate 260 m³/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Pre-filtration in UF systems
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers

Download Datasheet

L'articolo Suction Scanner self cleaning filter SCR LM & OM proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the IN inlet and goes through the filtering cylinder (4) from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

Constant deposit of suspended solid particles inside the filtering cylinder (1) obstructs the passage of water, causing a pressure differential (∆P). At a preset ∆P value (ranging from 0.2 ÷ 0.4 Bar) an automatic cleaning cycle of the filtering (1) cylinder starts. This activity begins with a signal that opens the discharge valve (2) allowing communication of the suction nozzles (3) with the outside environment. At the same time, the electric motor’s (4) rotary motion allows the nozzles to inspect the entire filtering surface. Dirt is removed through the discharge valve (2). The cleaning cycle lasts 15 sec.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch or by time. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control centre. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

3D FILTERING TECHNOLOGY

The filtering element of the filtering fabric is made of AISI316 sintered fibre. This ensures high permeability with excellent filtering efficiency owed to the fabric’s thickness (hence called 3D) and the diameter of the fibres. At equal surface and pressure differential, this type of construction allows retention of a much greater amount of TSS (Total Suspended Solids) compared with traditional single thread fabrics. Additionally, exposed to Delta P, the fibres are far more stable compared with single thread fabrics. The filtering fabrics used are tested in our laboratories to assess the performance of the main filtering process.

Based on performance assessments, the most suitable fabrics for the requested use are selected.

DIMENSIONI E DATI TECNICI | SCR LM

MODELLO SCR L M 10 SCR L M 30 SCR L M 65 SCR L M 90 SCR L M 130
Area filtrante (cm²) 1000 3000 6500 9000 13000
Attacchi In/Out 2" BSP DN80 DN80-DN100 DN100 – DN150 DN150-DN200
Attacchi Scarico 1" 2" F 2" F 2" F 2" F
Attacchi svuotamento 1/2" F 1/2" F 1/2" F 1" F 1" F
Extra portata richiesta in lavaggio a 1 Bar con tessuto da 5 micron – m³/h 4 4 8 9 14
Durata del lavaggio – Sec. 20 20 20 20 20
Pressione min-max – Bar 1-10 1-10 1-10 1-10 1-10
Temperatura max – °C 50 50 50 50 50
Alimentazione elettrica – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Potenza richiesta – Watt 90 180 180 370 550
Elettrovalvola – Volt / Watt 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6
Alimentazione pneumatica – Bar - - 2 – 8 2 – 8 2 – 8
Norme di calcolo vessel EN13445 EN13445 EN13445 EN13445 EN13445
Certificati di costruzione CE CE CE CE CE
Massima dimensione di particelle in ingresso – mm 0.2 0.2 0.2 0.2 0.2
Massimo totale solidi sospesi in ingresso 20 micron – mg/l 20 20 20 20 20
Massimo totale solidi sospesi in ingresso 10 micron – mg/l 10 10 10 10 10
Massimo totale solidi sospesi in ingresso 5 micron – mg/l 5 5 5 5 5
Piedi inclusi inclusi inclusi inclusi inclusi
A (mm) 965 1420 1860 1930 2330
B (mm) 440 710 710 800 910
C (mm) 390 530 530 645 755
D (mm) Estrazione cartuccia 450 590 1030 1150 1650
PESO a vuoto Kg 32 64 81 190 238
PESO in lavoro Kg 103 157 325 523 523

DIMENSIONI E DATI TECNICI | SCR OM

MODELLO SCR L OM 65 SCR L M 90 SCR L M 130
Area filtrante (cm²) 6500 9000 13000
Attacchi In/Out DN80-DN100 DN100 – DN150 DN150-DN200
Attacchi Scarico 2" F 2" F 2" F
Attacchi svuotamento 1/2" F 1" F 1" F
Extra portata richiesta in lavaggio a 1 Bar con tessuto da 5 micron – m³/h 8 9 14
Durata del lavaggio – Sec. 20 20 20
Pressione min-max – Bar 1-10 1-10 1-10
Temperatura max – °C 50 50 50
Alimentazione elettrica – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Potenza richiesta – Watt 180 370 550
Elettrovalvola – Volt / Watt 24 AC / 6 24 AC / 6 24 AC / 6
Alimentazione pneumatica - Bar 2 – 8 2 – 8 2 – 8
Norme di calcolo vessel EN13445 EN13445 EN13445
Certificati di costruzione CE CE CE
Massima dimensione di particelle in ingresso – mm 0.2 0.2 0.2
Massimo totale solidi sospesi in ingresso 20 micron – mg/l 20 20 20
Massimo totale solidi sospesi in ingresso 10 micron – mg/l 10 10 10
Massimo totale solidi sospesi in ingresso 5 micron – mg/l 5 5 5
Piedi inclusi inclusi inclusi
A (mm) 1860 1930 2430
B (mm) 710 840 910
C (mm) 530 645 755
D (mm) Estrazione cartuccia 1030 1150 1650
PESO a vuoto Kg 81 190 238
PESO in lavoro Kg 157 325 523

FLOW RATE

MODEL 20 µm 3D AISI316 10 µm 3D AISI316 5 µm 3D AISI316
SCR L M 2-10 20 15 10
SCR L M 80-30 60 45 30
SCR L M 80/100-65 130 97 65
SCR L M 100/150-90 180 135 90
SCR L M 150/200-130 260 195 130

L'articolo Suction Scanner self cleaning filter SCR LM & OM proviene da Elfi Filtration.

]]> Suction Scanner self cleaning filter SCR LM & OM HT https://www.elfifiltration.com/en/products/industrial-filtration/suction-scanner-self-cleaning-filter-scr-lm-om-ht/ Mon, 02 Sep 2024 11:00:50 +0000 https://www.elfifiltration.com/prodotti/uncategorized/suction-scanner-self-cleaning-filter-scr-lm-om-ht/ SUCTION SCANNER SELF CLEANING FILTER MICROFILTRATION HIGH TEMPERATURE ASI316 (MEDIUM FLOW RATE)
MAX TEMPERATURE 85°
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration degree from 20 to 5 micron
  • Maximum flow rate 260 m³/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Pre-filtration in UF systems
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers

Download Datasheet

L'articolo Suction Scanner self cleaning filter SCR LM & OM HT proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the IN inlet and goes through the filtering cylinder (4) from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).

REGENERATION

Constant deposit of suspended solid particles inside the filtering cylinder (1) obstructs the passage of water, causing a pressure differential (∆P). At a preset ∆P value (ranging from 0.2 ÷ 0.4 Bar) an automatic cleaning cycle of the filtering (1) cylinder starts. This activity begins with a signal that opens the discharge valve (2) allowing communication of the suction nozzles (3) with the outside environment. At the same time, the electric motor’s (4) rotary motion allows the nozzles to inspect the entire filtering surface. Dirt is removed through the discharge valve (2). The cleaning cycle lasts 15 sec.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch or by time. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control centre. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

3D FILTERING TECHNOLOGY

The filtering element of the filtering fabric is made of AISI316 sintered fibre. This ensures high permeability with excellent filtering efficiency owed to the fabric’s thickness (hence called 3D) and the diameter of the fibres. At equal surface and pressure differential, this type of construction allows retention of a much greater amount of TSS (Total Suspended Solids) compared with traditional single thread fabrics. Additionally, exposed to Delta P, the fibres are far more stable compared with single thread fabrics. The filtering fabrics used are tested in our laboratories to assess the performance of the main filtering process.

Based on performance assessments, the most suitable fabrics for the requested use are selected.

DIMENSIONI E DATI TECNICI | SCR LM HT

MODELLO SCR L M 10 SCR L M 30 SCR L M 65 SCR L M 90 SCR L M 130
Area filtrante (cm²) 1000 3000 6500 9000 13000
Attacchi In/Out 2" BSP DN80 DN80-DN100 DN100-DN150 DN150-DN200
Attacchi Scarico 1" 2" F 2" F 2" F 2" F
Attacchi svuotamento 1/2" F 1/2" F 1/2" F 1" F 1" F
Extra portata richiesta in lavaggio a 1 Bar con tessuto da 5 micron – m³/h 4 4 8 9 14
Durata del lavaggio – Sec. 20 20 20 20 20
Pressione min-max – Bar 1-10 1-10 1-10 1-10 1-10
Temperatura max – °C 85 85 85 85 85
Alimentazione elettrica – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Potenza richiesta – Watt 90 180 180 370 550
Elettrovalvola – Volt / Watt 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6 24 AC / 6
Alimentazione pneumatica – Bar - - 2 – 8 2 – 8 2 – 8
Norme di calcolo vessel EN13445 EN13445 EN13445 EN13445 EN13445
Certificati di costruzione CE CE CE CE CE
Massima dimensione di particelle in ingresso – mm 0.2 0.2 0.2 0.2 0.2
Massimo totale solidi sospesi in ingresso 20 micron – mg/l 20 20 20 20 20
Massimo totale solidi sospesi in ingresso 10 micron – mg/l 10 10 10 10 10
Massimo totale solidi sospesi in ingresso 5 micron – mg/l 5 5 5 5 5
Piedi inclusi inclusi inclusi inclusi inclusi
A (mm) 965 1420 1830 2330 2330
B (mm) 440 710 860 910 910
C (mm) 390 530 645 755 755
D (mm) Estrazione cartuccia 450 590 1030 1150 1650
PESO a vuoto Kg 34 64 140 190 238
PESO in lavoro Kg 103 157 325 523 523

DIMENSIONI E DATI TECNICI | SCR OM HT

MODELLO SCR L OM 65 SCR L M 90 SCR L M 130
Area filtrante (cm²) 6500 9000 13000
Attacchi In/Out DN80-DN100 DN100 – DN150 DN150-DN200
Attacchi Scarico 2" F 2" F 2" F
Attacchi svuotamento 1/2" F 1" F 1" F
Extra portata richiesta in lavaggio a 1 Bar con tessuto da 5 micron – m³/h 8 9 14
Durata del lavaggio – Sec. 20 20 20
Pressione min-max – Bar 1-10 1-10 1-10
Temperatura max – °C 85 85 85
Alimentazione elettrica – Volt 400 50/60 Hz 400 50/60 Hz 400 50/60 Hz
Potenza richiesta – Watt 180 370 550
Elettrovalvola – Volt / Watt 24 AC / 6 24 AC / 6 24 AC / 6
Alimentazione pneumatica - Bar 2 – 8 2 – 8 2 – 8
Norme di calcolo vessel EN13445 EN13445 EN13445
Certificati di costruzione CE CE CE
Massima dimensione di particelle in ingresso – mm 0.2 0.2 0.2
Massimo totale solidi sospesi in ingresso 20 micron – mg/l 20 20 20
Massimo totale solidi sospesi in ingresso 10 micron – mg/l 10 10 10
Massimo totale solidi sospesi in ingresso 5 micron – mg/l 5 5 5
Piedi inclusi inclusi inclusi
A (mm) 1860 1930 2430
B (mm) 710 840 910
C (mm) 530 645 755
D (mm) Estrazione cartuccia 1030 1150 1650
PESO a vuoto Kg 81 190 238
PESO in lavoro Kg 157 325 523

FLOW RATE

MODEL 20 µm 3D AISI316 10 µm 3D AISI316 5 µm 3D AISI316
SCR L M 2-10 20 15 10
SCR L M 80-30 60 45 30
SCR L M 80/100-65 130 97 65
SCR L M 100/150-90 180 135 90
SCR L M 150/200-130 260 195 130

L'articolo Suction Scanner self cleaning filter SCR LM & OM HT proviene da Elfi Filtration.

]]> Brush self cleaning filter SP L & SP O https://www.elfifiltration.com/en/products/industrial-filtration/brush-self-cleaning-filter-sp-l-sp-o/ Mon, 02 Sep 2024 10:09:43 +0000 https://www.elfifiltration.com/prodotti/uncategorized/brush-self-cleaning-filter-sp-l-sp-o/ BRUSH SELF CLEANING FILTER COARSE FILTRATION (MEDIUM BIG FLOW RATE)
MAIN TECHNICAL FEATURES:
  • Filtration degree from 2000 to 80 μm on polyester mesh/ AISI316
  • Maximum flow rate 1000 m3/h with a single filter
  • Minimum amount discharge water
APPLICATIONS:
  • Pre-filtration in UF systems
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers
  • Seawater
  • Irrigation

Download Datasheet

L'articolo Brush self cleaning filter SP L & SP O proviene da Elfi Filtration.

]]>

HOW IT WORKS

Water enters the filter through the inlet (IN), it goes through the filtering cylinder (1) from inside out, which retains the suspended filters to be filtered; it retains all suspended solids with size larger or equal to the filtration degree installed. Filtered water leaves through the master valve (OUT).

REGENERATION

The continuous settling of suspended solids obstructs the passage of water which results in a pressure difference (∆P). At a preset value of ∆P (range 0.3 ÷ 1 Bar) an automatic cycle will start to clean the filter cylinder (1). This operation starts with a signal that closes the outlet valve, (2) which clears the ∆P, and opens the discharge valve (3). At the same time the electric motor (4) rotates the brushes (5) in the filtering cylinder to clear away the contaminant that is ejected through the discharge valve (3). The cleaning cycle lasts approximately 20 seconds.

CONTROL

A switchboard controls the washing phases. The signal that starts the cleaning cycle is given by a differential pressure switch or by time. The switchboard gives an “alarm” signal in case of problems in the washing system. These signals can be sent to a pre-existing control centre. The washing phase can also be controlled manually. The solenoid controlling the valve is pneumatic.

FILTER ELEMENT SECTION AND CLEANING SYSTEM

TECHNICAL DATA AND DIMENSIONS | SP L

MODELSP L 10SP L 15SP L 30SP L 45SP L 60SP L 75SP L 90SP L 130
Filtering area (cm²)100015003000450060007500900013000
Connections- In/Out2"3"DN100DN150DN200DN250DN300DN350
Discharge connection1" F1" F1 1/2" F1 1/2" F1 1/2" F1 1/2" F1 1/2" F2" F
Draining connections1/2" F1/2" F1/2" F1/2" F1/2" F1 1/2" F1" F1" F
Extra flow rate required during washing at 1 Bar with mesh from 800 to 80 micron – m³/h234799915
Wash duration - Sec2020202020202020
Min-max pressure – Bar0,5-100,5-100,5-100,5-100,5-100,5-100,5-100,5-10
Max Temperature - °C5050505050505050
Power supply – Volt400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz
Power required – Watt90180180180370370370550
Solenoid valve – Volt /Watt24 AC /624 AC /624 AC /624 AC /624 AC /624 AC /624 AC /624 AC /6
Pneumatic supply - Bar2 - 82 - 82 - 82 - 82 - 82 - 82 - 82 - 8
Construction certificatesCECECECECECECECE
Maximum size of inlet
particles – mm		1010101010101010
Max total suspendedsolids at inlet 125 micron – mg/l3030303030303030
A (mm)757903107113091755202725813181
B (mm)4855056457458009059681114
C (mm)327423423516714852852852
D (mm) Cartridge extraction4506006408851130116011601690
WEIGHT when empty Kg3451627285127223305
WEIGHT in operation Kg425181116143214356618

TECHNICAL DATA AND DIMENSIONS | SP O

MODELSP O 10SP O 15SP O 30SP O 45SP O 60SP O 75SP O 90SP O 130
Filtering area (cm²)100015003000450060007500900013000
Connections- In/Out2"3"DN100DN150DN200DN250DN300DN350
Discharge connection1"1/2F1"1/2F2"F2"F2"F2"F2"F2"F
Washing flow rate - m³/h510152024243545
Wash duration - Sec.1515151515151515
Min-max pressure - Bar0,5-100,5-100,5-100,5-100,5-100,5-100,5-100,5-10
Max Temperature - °C5050505050505050
Power supply - Volt400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz
Power required - Watt90180180180370370370550
Solenoid valve - Volt / Watt24 AC / 624 AC / 624 AC / 624 AC / 624 AC / 624 AC / 624 AC / 624 AC / 6
Pneumatic supply - Bar2 - 82 - 82 - 82 - 82 - 82 - 82 - 82 - 8
Construction certificatesCECECECECECECECE
Maximum size of inlet particles – mm3030303030303030
Max total suspended solids at inlet – 125 micron mg/l3030303030303030
A (mm)9401185143016751920205522002700
B (mm)4705855905956256858851195
C (mm)33042042048562579510401195
D (mm) * Cartridge extractiona25040058564081085010401230
WEIGHT when empty Kg2529465282125200288
WEIGHT in operation Kg33427291116222370628

FILTERING MESH FLOW RATE TABLE FOR SP FILTERS (m3/h)

MODEL 800 µm PES AISI316 500 µm PES AISI316 300 µm PES AISI316 200 µm PES AISI316 125 µm PES AISI316 80 µm PES AISI316
SP 10 30 30 30 30 30 30
SP 15 80 80 80 80 80 80
SP 30 147 147 147 147 147 111
SP 45 216 216 216 216 216 166
SP 60 315 315 315 315 315 222
SP 75 573 573 573 573 395 277
SP 90 720 720 720 720 473 333
SP 130 1038 1038 1038 1038 682 373

The flow rates indicated refer to a load loss of 0.2 Bar with clean, filtered water.

PARTS DESCRIPTION

PART DESCRIPTION
Body AISI316 – SAF2205 – SAF2507
Cover AISI316 – SAF2205 – SAF2507
Connection threading BSP
Connection threading EN 1092-1 PN10
Mesh support strainer PVC – AISI316
Filtering mesh Polyester – AISI316: 500, 300, 200, 125, 80, 50, 25 µm
Brushes PVDF
Brush support PVC – AISI316
Internal seals NBR – EPDM
Reduction unit Aluminium and carbon steel
Electric motor Hot-painted aluminium
Solenoid valve Five-way aluminium
Switchboard ABS IP65 with front display
Differential pressure switch Aluminium with parts in contact with liquid made of AISI 316
Discharge valve PP diaphragm with flow rate regulation
Outlet valves Butterfly with AISI316 disc and double-acting pneumatic actuator
Pressure gauges Stainless steel with 2″1/2 dial, radial connection and 0-10 Bar indication
Accessories (Plugs and adapters) PP – PVC – AISI316

SUGGESTED INTALLATION

L'articolo Brush self cleaning filter SP L & SP O proviene da Elfi Filtration.

]]> High Efficiency Centrifugal Separator filter IC & IC HF https://www.elfifiltration.com/en/products/industrial-filtration/high-efficiency-centrifugal-separator-filter-ic-ic-hf/ Mon, 02 Sep 2024 09:41:05 +0000 https://www.elfifiltration.com/prodotti/uncategorized/high-efficiency-centrifugal-separator-filter-ic-ic-hf/ CENTRIFUGAL SEPARATOR FILTER HYDROCYCLONES (MEDIUM, LARGE FLOW RATE)
MAIN TECHNICAL FEATURES:
  • Capacity ranging from 3.5 to 725 m3/h
  • Minimum amount discharge water
  • High separation efficiency above 97% on particles having 75 micron diameter, 80% on particles having 50 micron diameter and 1.6 Kg/dm3 specific weight
  • Minimal pressure loss
APPLICATIONS:
  • Prefiltration for water treatment plants
  • Cooling towers
  • Spray nozzle protection
  • Heat exchangers

Download Datasheet

L'articolo High Efficiency Centrifugal Separator filter IC & IC HF proviene da Elfi Filtration.

]]>

HOW IT WORKS

The water to be filtered flows through an inlet (1), welded tangential to the body, then moves downward towards the inner cone (2) as its speed increases. The centrifugal force created separates the heavier suspended solids from the water. The cleaned water hits the deflector (3) and goes back up through the outlet collector (4). Impurities are deposited below the deflector in the collection tank (5). The particles can either be discharged continuously or purged on a timed schedule via a drain hole (6).

FILTRATION EFFICIENCY

The cyclones product range features two series, the IC series with good separation performance and low head losses and the IC HF series, with excellent separation performance even up to 10 micron, but with high head loss. The diagram below shows the differences in separation efficiency between the IC and IC HF series.

REMOVAL EFFICIENCY

Comparison of IC and IC HF hydrocyclones

HEAD LOSS

STANDARD IC HYDROCYCLONE
Technical Specifications

MODEL IC ¾” IC 1” IC 1”1/2 IC 2” IC 3” IC DN100 IC DN150 IC DN200 IC DN250
Flow rate – m³/h – With ΔP from 0.2 to 1 bar 3,5-7 6-12 11-25 18-40 32-56 52-102 91-194 186-468 295-725
Connections- In/Out ¾”M 1”M 1”1/2M 2”M 3”M DN100 DN150 DN200 DN250
Connection Discharge 3/8” F ½” F ½” F ¾”F ¾”F 1”F 1”1/2F 1”1/2F 2”F
Maximum working pressure – Bar 10 10 10 10 10 10 10 10 10
Max Temperature – °C 80 80 80 80 80 80 80 80 80
MODEL IC ¾” IC 1” IC 1”1/2 IC 2” IC 3” IC DN100 IC DN150 IC DN200 IC DN250
Dimensions
A (mm) 780 935 1050 1220 1550 2300 2700 3610 3610
B (mm) 75 85 100 180 180 330 330 465 505
C (mm) 80 100 130 180 355 355 345 525 589
D (mm) 295 315 330 350 385 460 445 570 570
E (mm) 295 315 330 350 385 460 460 890 990
F (mm) 31 35 45 45 50 88 88 990 990
WEIGHT Kg 11 15 21 32 51 73 118 187 278

HIGH EFFICIENCY IC HF HYDROCYCLONE
Technical Specifications

MODEL IC HF ¾” IC HF 1” IC HF 1”1/2 IC HF 2” IC HF 3” IC HF DN100 IC HF DN150
Flow rate – m³/h – With ΔP from 0.2 to 1 bar 2-6 4-8 8-16 18-40 28-38 40-68 91-194
Connections- In/Out ¾”M 1”M 1”1/2M 2”M 3”M DN100 DN150
Connection Discharge 3/8” F ½” F ½” F ¾”F ¾”F 1”F 1”1/2F
Maximum working pressure – Bar 10 10 10 10 10 10 10
Max Temperature – °C 60 60 60 60 60 60 60
MODEL IC HF ¾” IC HF 1” IC HF 1”1/2 IC HF 2” IC HF 3” IC HF DN100 IC HF DN150
Dimensions
A (mm) 780 935 1050 1220 1555 2300 2700
B (mm) 75 85 110 140 140 255 330
C (mm) 80 100 130 180 355 355 345
D (mm) 295 315 330 350 385 460 445
E (mm) 295 315 330 350 385 460 590
F (mm) 31 43 45 46 54 105 600
WEIGHT Kg 11 15 21 32 51 73 118

L'articolo High Efficiency Centrifugal Separator filter IC & IC HF proviene da Elfi Filtration.

]]>