Description
HOW IT WORKS
Water enters the filter through the (IN) inlet and goes through the filtering cylinder from the inside to the outside. This will retain all non-deformable suspended solids that are the same size or bigger than the filtration degree installed. Filtered water leaves through the outlet pipe (OUT).
REGENERATION
To clean the filter element is necessary drain the vessel through the ball valve, open the cover, extract the filter element and wash it.
DIMENSIONS AND TECHNICAL DATA
| RL Y 2-10 | RL Y 80-15 | RL Y 100-30 | RL Y 150-45 | RL Y 200-60 | |
|---|---|---|---|---|---|
| Filtering area – (cm²) | 1000 | 1500 | 3000 | 4500 | 6000 |
| Connections In/Out (1-2) | 2″ M | DN80 | DN100 | DN150 | DN200 |
| Connection Discharge (3) | 1″ F | 1″ F | 1″ F | 1″ F | 1″ 1/2F |
| Max pressure work – Bar | 10 | 10 | 10 | 10 | 10 |
| Max temperature work – °C | 50 | 50 | 50 | 50 | 50 |
| PH – min.max | 3-9 | 3-9 | 3-9 | 3-9 | 3-9 |
| A – mm | 465 | 635 | 670 | 915 | 1050 |
| B – mm | 425 | 500 | 600 | 750 | 950 |
| C – mm | 400 | 540 | 590 | 795 | 900 |
| D – mm | 230 | 230 | 335 | 335 | 335 |
| E – mm Cartridge extraction | 300 | 500 | 550 | 780 | 880 |
| Empty weight Kg | 22 | 25 | 45 | 66 | 88 |
| Work weight Kg | 28 | 39 | 76 | 111 | 169 |
RL Y FILTER FLOW-RATE TABLE (m³/h)
| MODEL | 300 µm PES | 200 µm PES | 125 µm PES | 80 µm PES | 50 µm PES | 25 µm PES |
|---|---|---|---|---|---|---|
| RL Y 2-10 | 30 | 30 | 30 | 30 | 26 | 13 |
| RL Y 80-15 | 80 | 80 | 50 | 50 | 39 | 19 |
| RL Y 100-30 | 147 | 147 | 147 | 111 | 78 | 34 |
| RL Y 150-45 | 216 | 216 | 216 | 166 | 117 | 59 |
| RL Y 200-60 | 373 | 373 | 315 | 222 | 156 | 78 |
