Olive oil industry | Elfi Filtration https://www.elfifiltration.com/en/applicazione/olive-oil-industry/ Filtri autopulenti industriali Tue, 30 Sep 2025 14:52:36 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 Spiroclean https://www.elfifiltration.com/en/products/food-industry-filtration/spiroclean/ Tue, 30 Jul 2024 10:23:24 +0000 https://www.elfifiltration.com/prodotti/uncategorized/spiroclean/ SELF-CLEANING FILTER SPIROCLEAN SERIES
MAIN TECHNICAL FEATURES:
  • Flow-rate uninterrupted even during washing phase
  • Filtration degree ranging from 2000 to 50 μm on filtering element in AISI316
  • Maximum flow rate 100 m3/h with a single filter
  • Minimum water for cleaning
  • All internal and external elements in contact with fluid are MOCA certified

Download Datasheet

L'articolo Spiroclean proviene da Elfi Filtration.

]]>

HOW IT WORKS

The fluid enters the filter through the inlet (1) and flows from the inside to the outside of the filter cylinder. All non-deformable suspended solids larger than the filtration grade are retained on the filter surface. The treated fluid exits through the outlet (2).

REGENERATION SOLID/LIQUID DISCHARGE

The fluid enters the filter through the inlet (1) and flows from the inside to the outside of the filter cylinder. All non-deformable suspended solids larger than the filtration grade are retained on the filter surface.

The treated fluid exits through the outlet (2). How it works The cleaning phase is carried out using an innovative patented solution. The scraping blades, positioned tangentially inside the filter element, gently remove the solids deposited on it. The impurities are directed toward the concentration and discharge zone (3).

Impurity discharge is performed via two valves to compact the solids as much as possible. The washing cycle is time-controlled or pressure-differential controlled and is adjusted according to the amount of solids and the flow rate to be treated. During the cleaning phase the flow is not interrupted. The new solution adopted for the scraping blades significantly reduces wear on both the blades and the filter element, consequently minimizing potential contamination of the filtered fluid.

CONTROL

An electrical control panel manages the regeneration and washing phases. The cleaning cycle can be triggered by pressure differential via installed transmitters or by timer. The interval between openings and the discharge valve opening time can be adjusted. The panel is equipped with a push-button interface for manual motor operation. The discharge valves can also be opened manually via the solenoid valve actuator. An alarm signal indicates the absence of motor rotation during the washing phase. The software also controls the CIP washing phases at the end of the production cycle.

DIMENSIONS AND TECHNICAL DATA

MODELSPIROCLEAN 20SPIROCLEAN 30SPIROCLEAN 45SPIROCLEAN 60
Filtering area (cm²)2000300045006000
In/Out (1) (2)DN 50 FDN 60 FDN 65 FDN 65 F
Discharge/Drain (3)DN 80 FDN 100 FDN 100 FDN 100 F
Air vent (4)DN 25 FDN 25 FDN 25 FDN 25 F
Min-max pressure – Bar0,5-100,5-100,5-100,5-10
Max Temperature – °C90909090
Max flow rate – m³/h45454565
Power supply – Volt400 50/60 Hz400 50/60 Hz400 50/60 Hz400 50/60 Hz
Power required – Watt180370370550
Solenoid valve – Volt / Watt24 AC / 624 AC / 624 AC / 624 AC / 6
Pneumatic supply – Bar2 – 82 – 82 – 82 – 8
Construction certificatesCECECECE
Pressure vessel codeEN 13445EN 13445EN 13445EN 13445
Volume – Liters28487295
DavitIncludedIncludedIncludedIncluded
FootIncludedIncludedIncludedIncluded
A (mm)1851189521202150
B (mm)516586586611
C (mm)562618618664
D (mm) Cartridge extraction700700950950
WEIGHT when empty Kg82112137232
WEIGHT in operation Kg108154195293


Technical data are indicative and subject to change without notice.
• Maximum flow rate: 100 micron, 1 CSP, ΔP 0.2 bar.

L'articolo Spiroclean proviene da Elfi Filtration.

]]>